![background image](http://html1.mh-extra.com/html/smc-networks/ez-switch-smcgs1601p/ez-switch-smcgs1601p_user-manual_1300341022.webp)
C
HAPTER
2
| Hardware Description
Rear Panel
– 22 –
RJ-45 P
ORTS
The switch contains 16 1000BASE-TX RJ-45 ports. All ports support automatic
MDI/MDI-X operation, so you can use straight-through cables for all network
connections to PCs or servers, or to other switches or hubs.
Each of these ports support auto-negotiation, so the optimum transmission
mode (half or full duplex), and data rate (10/100/1000 Mbps) is selected
automatically.
Each port also supports IEEE 802.3x auto-negotiation of flow control, so the
switch can automatically prevent port buffers from becoming saturated.
R
EAR
P
ANEL
The rear panel of the switch features a power socket.
Figure 3: SMCGS1601P Switch Rear Panel
AC P
OWER
S
OCKET
Connect the female connector of the power cord here, and the male connector to
the AC power outlet. Make sure the voltage of the power supply meets the
requirement of the input voltage.
100-240VAC 50-60Hz 1A
100-240 VAC
50 / 60 Hz
Summary of Contents for EZ Switch SMCGS1601P
