SMC Networks EtherPower II 10/100, User Manual

Page: 32 / 78

3-2
I
NSTALLING AND
C
ONFIGURING
N
ETWORK
D
RIVERS
Note: The installation procedure for users of Windows 95 OEM
Service Release 2 and Windows 98 may be slightly
different than that described here. Refer to the Windows
95/98 driver installation document on the SMC SuperDisk
for more information.
5. The “Install From Disk” window appears. Insert the SMC
SuperDisk, specify the path to the root of the disk, and click on
“OK.”
6. The message “The file netapi.dll on SMC SuperDisk could not
be found” appears. Specify the path to the Windows 95/98
CD-ROM installation files, and click on “OK.”
6. You may be prompted for Windows 95/98 installation files. If
so, click on “OK” and then type the path to your Windows
95/98 CD-ROM installation files, and click “OK.”
7. Follow the remaining Windows 95/98 instructions to complete
the installation. After all the files have been copied, you are
prompted to reboot for the changes to take effect. Select “Yes”
when prompted to restart your computer, and remove the SMC
SuperDisk.
Optional Procedures to Modify Card Settings and Add
Network Protocols
u
Double-click on the “My Computer,” “Control Panel,” and
“Network” icons. The “Network” dialog box appears. If the
correct network protocols are not installed in the “Primary
Network Logon” list box, select the primary network to which
you will be attaching. Click on “Add.” The “Select Network
Component Type” dialog box appears. Follow the on-screen
directions to select network protocols.