-5-
No.D-
※
S-OMG0006-C
Caution
■
Do not touch terminals and connectors while the power is ON.
Otherwise electric shock, malfunction or damage to the product can result.
■
After completing maintenance, perform appropriate functional checks.
Stop operation if the equipment does not function correctly.
Safety cannot be assured in the case of unexpected malfunction.
Perform periodic maintenance checks as follows.
1) Securely tighten the product mounting screws.
If the screws have become loose and the required mounting position has been lost, re-adjust the product to the
correct mounting position and re-tighten the screws.
2) Check that there is no damage to the cable.
If damage to the cable is found, replace the product, or repair the cable, to avoid faulty insulation.
3) Check the detecting position setting.
Confirm that the product ON/OFF position is at the centre of the operating range (green light range).
If the product operates with a red light ON at the ON/OFF position, the mounting position is not correct. Re-adjust
the product to the optimum position at the centre of the operating range.
Some actuator and cylinder series have their own setting methods. In such cases, follow the instructions given.
■
Check the wiring.
Incorrect wiring or short circuit of load may damage the product.
