![background image](http://html1.mh-extra.com/html/smc-networks/c-rb-10-series/c-rb-10-series_operation-manual_1299522012.webp)
前付 10
Maintenance
(1) Perform maintenance inspection according to the procedures indicated in the operation manual.
If handled improperly, malfunction and damage of machinery or equipment may occur.
(2) Maintenance work
If handled improperly, compressed air can be dangerous. Assembly, handling, repair and element replacement
of pneumatic systems should be performed by a knowledgeable and experienced person.
(3) Drain flushing
Remove drainage moisture from air filters regularly.
(4) Removal of equipment, and supply/exhaust of compressed air
When components are removed, first confirm that measures are in place to prevent workpieces from dropping,
run-away equipment, etc. Then, cut off the supply pressure and electric power, and exhaust all compressed air
from the system using the residual pressure release function.
When machinery is restarted, proceed with caution after confirming that appropriate measures are in p
l
ace to
prevent cylinders from sudden movement.
(1)
For lubrication, use the designated grease for each specific product.
The use of a non-designated lubricant could damage the seals.
Warning
Caution