![background image](http://html1.mh-extra.com/html/smc-networks/barricade-smc7008abr/barricade-smc7008abr_user-manual_1300272002.webp)
7008ABR – Manual
2
COMPLIANCES
FCC - Class B
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with instructions, may
cause harmful interference to radio communications. However, there is no guarantee that the
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
EC Conformance Declaration - Class B
SMC contact for these products in Europe is:
SMC Networks Europe,
Edificio Conata II,
Calle Fructuós Gelabert 6-8, 2o, 4a,
08970 - Sant Joan Despí,
Barcelona, Spain.
This information technology equipment complies with the requirements of the Council Directive
89/336/EEC on the Approximation of the laws of the Member States relating to Electromagnetic
Compatibility and 73/23/EEC for electrical equipment used within certain voltage limits and the
Amendment Directive 93/68/EEC. For the evaluation of the compliance with these Directives, the
following standards were applied:
RFI Emission:
•
Limit class B according to EN 55022:1998
•
Limit class A for harmonic current emission according to EN 61000-3-2/1995
•
Limitation of voltage fluctuation and flicker in low-voltage supply system according to EN
61000-3-3/1995
Immunity:
•
Product family standard according to EN 55024:1998
•
Electrostatic Discharge according to EN 61000-4-2:1995 (Contact Discharge: ±4 kV, Air
Discharge: ±8 kV)
•
Radio-frequency electromagnetic field according to EN 61000-4-3: 1996 (80 - 1000MHz with
1kHz AM 80% Modulation: 3V/m)