manualshive.com logo in svg

SMC Networks Barricade SMC7008ABR, User Manual

Share
Download
SMC Networks Barricade SMC7008ABR User Manual Download Page 18

7008ABR – Manual 

 

18

6.2 | Advanced Setup 

Below is an outline of the Advanced Setup section.  This section is used to manually configure your 

ISP connection and also define the advanced system parameters, manage and control the Barricade 
and its ports, or monitor network conditions.  

 

6.2.1 | System 

This section is used to configure the local time zone, password for administrator access, and the IP 

address of a PC that will be allowed to manage the Barricade remotely. 

 

•

 

Time Zone

 

Use this option to the time zone for the Barricade. This information is used for log entries 

and client access control. 

 

•

 

Password Settings

 

Use this menu to restrict access based on a password. By default, there is no password. For 

security you should assign one before exposing the Barricade to the Internet. 

 

NOTE

: Passwords can contain from 3–12 alphanumeric characters and are not case 

sensitive. 

 

 

 

•

 

Remote Management

 

This feature allows a remote PC to configure, manage, and monitor the Barricade using a 

standard web browser. Check “Enable” and enter the IP address of the remote host. Click 

“Apply.” 

 

NOTE

: If you specify an IP address of 0.0.0.0, any host can manage the Barricade. 

Summary of Contents for Barricade SMC7008ABR















































Reviews:

No comments

Brands by name

Popular brands

Load more brands