![SMC Networks AV2000-02-1 Operation Manual Download Page 14](http://html1.mh-extra.com/html/smc-networks/av2000-02-1/av2000-02-1_operation-manual_1299302014.webp)
Changing the entry direction
After separating the terminal block and housing, the core entry can be changed by attaching
the housing with 90
o
interval direction. Note that the direction cannot be changed towards
this product.
* When equipped with a light, be careful not to damage the light with the cord’s lead wires.
Precautions
Plug in and pull out the connector vertically without tilting to one side.
Compatible cable
Cord O.D.:
φ
3.5 to
φ
7
(Reference) 0.5mm
2
, 2-core or 3-core, equivalent to JIS C 3306
Type “Y”
Y type DIN connector is a DIN connector that confirms to the DIN pitch 8-mm standard.
・
D type DIN connector with 9.4mm pitch between terminals is not interchangeable.
・
To distinguish from the D type DIN connector, “N” is listed at the end of voltage symbol.
(For connector parts without lights, “N” is not indicated. Refer to the name plate to distinguish.)
・
Dimensions are completely the same as D type DIN connector.
-13-