![background image](http://html1.mh-extra.com/html/smc-networks/6826mpe/6826mpe_installation-manual_1300180051.webp)
S
TACKING
S
WITCHES
3-11
5. Complete the stack connections by plugging one end of a stack cable
into the Tx port on the bottom unit and the other end into the Rx port
on the top unit.
6. Select the Master unit in the stack by pressing the push button in on
only one of the switches. Only one switch in the stack can operate as
the Master, all other units operate in slave mode. If more than one
switch in the stack is selected as Master, or if no switches are selected,
the stack will not function.
Note:
The stacking feature requires that all stacking transceiver ports be
connected and the switches powered on. If one stack link is not
connected, or if a switch is powered off, the stack will not
function.
Summary of Contents for 6826MPE
