![background image](http://html1.mh-extra.com/html/smc-networks/6709l2/6709l2_installation-manual_1300173018.webp)
A
BOUT
THE
T
IGER
S
WITCH
10/100
1-4
Module Slots
The switch provides two slots for optional media extender modules. The
slot on the front panel, labeled “M1,” supports fiber optic modules with
one 100BASE-FX port. The slot on the rear panel, labeled “M2,” supports
modules with one 1000BASE-X port.
See “Optional Media Extender Modules” on page 1-5 for more details on
the available modules.
LED Indicators
The LEDs, which are located on the front panel for easy viewing, are
shown below and described in the following table
Port Status LEDs
LED
Condition
Status
LK/ACT
On Green
Port has a valid network connection.
Flashing Green
Indicates network activity on the port.
Off
Port does not have a valid connection.
SPD
On Green
Port 1-8 or M1 is operating at 100 Mbps.
Off
Port 1-8 is operating at 10 Mbps.
LK
On
Slot M2* module port has a valid connection.
RX
On
Slot M2* module port is receiving data.
*If a 1000BASE-X module is installed in slot M2 and has a valid link on its port,
the front-panel 1000BASE-T port is disabled.
2
4
6
CPU
BC STM
BC STM
2
4
8
LK/ACT
SPD
M2
LK
RX
M1
LK/ACT
SPD
5
1
3
7
PWR
Summary of Contents for 6709L2
