SMC Networks 6152L2, Management Manual

Page: 512 / 582

C
OMMAND
L
INE
I
NTERFACE
4-222
Priority Commands (Layer 2)
queue mode
This command sets the queue mode to strict priority or Weighted
Round-Robin (WRR) for the class of service (CoS) priority queues. Use the
no form to restore the default value.
Syntax
queue mode { strict | wrr }
no queue mode
Table 4-60 Priority Commands
Command Groups Function Page
Priority (Layer 2) Configures default priority for untagged frames,
sets queue weights, and maps class of service tags
to hardware queues 4-222
Priority (Layer 3 and 4) Maps IP DSCP tags to class of service values 4-229
Table 4-61 Priority Commands (Layer 2)
Command Function Mode Page
queue mode Sets the queue mode to strict priority or
Weighted Round-Robin (WRR) GC 4-222
switchport priority
default Sets a port priority for incoming untagged
frames IC
4-222
queue bandwidth Assigns round-robin weights to the
priority queues GC 4-225
queue cos map Assigns class-of-service values to the
priority queues IC 4-226
show queue mode Shows the current queue mode PE 4-227
show queue
bandwidth Shows round-robin weights assigned to
the priority queues PE 4-227
show queue cos-map Shows the class-of-service map PE 4-228
show interfaces
switchport Displays the administrative and
operational status of an interface PE 4-156