manualshive.com logo in svg

SMC Networks 6152L2, Management Manual

Share
Download
SMC Networks 6152L2 Management Manual Download Page 218

C

ONFIGURING

 

THE

 S

WITCH

3-172

CLI

 – The following example adds tagged and untagged ports to 

VLAN 2.

Adding Static Members to VLANs 

(Port Index)

Use the VLAN Static Membership by Port menu to assign VLAN groups 
to the selected interface as a tagged member.

Command Attributes

•

Interface

 – Port or trunk identifier.

•

Member

 – VLANs for which the selected interface is a tagged 

member.

•

Non-Member

 – VLANs for which the selected interface is not a 

tagged member.

Web

 – Open VLAN, 802.1Q VLAN, Static Membership. Select an 

interface from the scroll-down box (Port or Trunk). Click Query to display 
membership information for the interface. Select a VLAN ID, and then 
click Add to add the interface as a tagged member, or click Remove to 
remove the interface. After configuring VLAN membership for each 
interface, click Apply.

Console(config)#interface ethernet 1/1

4-146

Console(config-if)#switchport allowed vlan add 2 tagged

4-206

Console(config-if)#exit
Console(config)#interface ethernet 1/2
Console(config-if)#switchport allowed vlan add 2 untagged
Console(config-if)#exit
Console(config)#interface ethernet 1/13
Console(config-if)#switchport allowed vlan add 2 tagged

Summary of Contents for 6152L2







































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands