SMC Networks 5100 IT Series, Manual

Page: 25 / 38

Model 5100-XX-IT Toxic Gas Sensor Module
Page: 21
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
Gas Range Adjustment Example
Enter Range S.P. Function - Range Adjust *C
Enter *100 PPM
Select [E] to select or S or T to select another and
press [E]
Down 10 PPM Press [E] if selecting 0-10 PPM range
Down USER Press [E] if selecting User adjustable range
Enter 100 PPM
Select [E] to select or S or T to select another and
press [E]
4-20 mA Adjustment Example
Enter Calib S.P. Function - Calib Adjust *D
Enter Out: 4mA Use S or T keys to select 4 mA or 20mA
Enter 4mA Selects 4 mA
Enter ACK Momentary Acknowledge of new Set Point
Mode Calib S.P. Function - Calib Adjust
Down CalibOut S.P. Function - Output during Calibration Adjust
Enter Track Use S or T keys to select Track, Zero, C1.50mA, C4.00mA
Track = Output during calibration tracks the calibration gas,
Zero = Output is Zero during calibration,
C1.50mA = Output during calibration is 1.50 mA, C4.00mA =
Output during calibration is 4.0 mA
Enter *Track * = Current selection
RS-485 Adjustment Example
Enter Address S.P. Function - RS-485 Address Adjust *E
Enter Addr:016 Use
S
or
T
keys to enter new address
Enter ACK New address selected
Enter Address S.P. Function - RS-485 Address Adjust
Table 4-3B Set-Up Configuration
Enter *38400 Press [E] to select or [
S
] or [
T
] to select another
Down Baud S.P. Function - RS-485 Baud Rate Adjust