manualshive.com logo in svg

SMC Networks 2621W-P, User Manual, Page: 52 / 133

Share
Download
SMC Networks 2621W-P User Manual Download Page 52

Operation

47

Menus

[Main] Menu

[Device Status]

Same as [Device] Icon.

[Printer Status]

Same as [Printer Status] Icon.

[Configure]

Same as [Configure] Icon.

[Upgrade]

Same as [Upgrade] Icon.

[Refresh]

Same as [Refresh] Icon.

[Exit]

Same as [Exit] Icon.

[InitDevice] Menu

Diagnostics menu

[Print Test Page]

Use this option to print a test sheet from the 
selected Wireless Print Server port. The test 
print out will include status information.

[Reset Device]

This will cause the device to reboot. This 
should be done after making any configuration 
changes, or if the device stops responding 
after some problems.

[Restore 
to Factory 
Default]

This will restore ALL device values to their 
factory defaults. To restore only the current 
screen, use the [Set to Default] button on 
the screen.

[Attached 
Remote]

This is used to connect to a Wireless Print 
Server device on another LAN segment. 
You need to know the IP address of the 
remote Wireless Print Server. If your LAN 
does not have a Router, you can ignore this 
option.

[Connected 
Protocol]

This option allows you to designate which
LAN protocol will be used for communication 
between the selected device and this 
application. 
You should select ONE protocol only.

Summary of Contents for 2621W-P






































































































































Reviews:

No comments