SMC Networks 2621W-P, User Manual, Page: 117 / 133

Appendix C Unix Systems
116
•
Add an entry to the
arp
table to associate the hardware
address of the Wireless Print Server with the desired IP
address, as follows:
arp -s IP_Address 00:c0:02:xx:xx:xx
Where:
IP_Address
is the IP Address you wish to assign to the
Wireless Print Server.
00:c0:02:xx:xx:xx i
s the hardware address of the
Wireless Print Server.
Example
arp -s 192.168.0.21 00:c0:02:12:34:56
You should then assign this IP address to the Wireless Print
Server using your Web Browser, as described in Chapter 6 -
Web-Based Management.
Note: The hardware address of the Wireless Print Server
is shown on a sticker on the base of the device.
Other Wireless Print Server Configuration
The recommended method to configure the Wireless Print Server
is to use the Web-based interface, as described in Chapter 6 -
Web-Based Management.
•
Ensure that the TCP/IP settings are correct for your network.
•
The logical printers (e.g. L1) must be configured correctly
to match your system.