- 19 -
(2)Name and function
No.
Description
Function
1
Search method
Actuators can be selected from "search on condition" or
"search from product No.".
・
Search on condition
：
Select the "ACT series", "Controller", "Dir. of installing
motor ", "Lead" and "Stroke" of the actuator to which
parameter or step data is written, and search the
product No. of the actuator.
・
Search from Product No.
：
Input a part of the product part number of the actuator
to which parameter or step data is written, and search
the product No. of the actuator.
2
Actuator specification
Before search on condition, select the "ACT series",
"Controller", "Dir. of installing motor ", "Lead" and "Stroke"
of the actuator to which parameter or step data is to be
written
3
Actuator product No.
Input a part of the product part number of the actuator to
which parameter or step data is written, and search the
product No. of the actuator.
e.g.1
）
LE
e.g.2
）
-400
e.g.3
）
LE*-400
4
Search excution button
Search the product No. which is applicable to the set
actuator from "search on condition" or "search from the
product No.".
5
Seeking product No. of
ACT
Product No. group searched from "search on condition" or
"search from Product No." is displayed. Select the actuator
to which parameter or step data is to be written from this
product No. group.
6
Controller condition
Set the "SV No." and "IO type" of the controller.
- SV No.: Controller software version
A version label is attached to the side of the
controller, showing SV*.**. Refer to 4.4.1 (3)
How to use writing function by selecting ACT
(actuator) for details.
- IO type: Parallel I/O specifications of the controller.
Can be selected from NPN or PNP.
This is described on the label attached to the
front of the controller. Refer to 4.4.1 (3) How to
use writing function by selecting ACT (actuator)
for details.
Check the specifications of the connected controller.
7
Communication setting
button
The communication setting window is displayed. Refer to
4.3 Communication setting for how to set communication.
