- 12 -
4
Communication speed
For "manual" communication confirmation, the communication
speed which has been set in the connected controller can be
selected. The range of communication speeds are 9600,
19200, 38400, 57600, 115200 and 230400[bps].
5
Setting initialization button
Manually set ID and communication speed are initialized to the
default values that are stated below. (These values are the
same as the default values of the blank controller.)
・
ID
：
1
・
Communication speed
：
38400[bps]
6
Check Communication
button
The communication check is performed by the already
selected communication check method.
7
End button
“End”: Terminate the software
"Return": The window is returned to the previous page.
8
Next button
When the communication to controller is confirmed to be
available, it is possible to move to the main menu by clicking
this button.
(3) How to perform communication setting
a) Click the "communication port selection" list button and select the COM port number of the
communication port to which the "communication cable (LEC-W2-C)" and "USB cable
(LEC-W2-U)" are connected.
Caution
Be sure to set the COM port number of the communication port regardless of
"Automatic" or "Manual" communication check method.
