Smawave Technology MGL6201A User Manual Download Page 6

Page: 6 / 56

Browser



Internet Explorer 7.0 or later



Firefox 3.6 or later



Opera 10 or later



Safari 5 or later



Chrome 9 or later

1.3Logging In to the Web Management Page

Use a browser to log in to the web management page to configure and manage the Module.

The following procedure describes how to use a computer running Windows XP and Internet
Explorer 7.0 to log in to the web management page of the Module.

Connect the Module properly.

Launch Internet Explorer, enter

http://192.168.1.1

in the address bar, and press Enter. As

shown in Figure 1-1.

Figure 1- 1

Enter the user name and password, and click Log In.

You can log in to the web management page after the password is verified. As shown in Figure
1-2.

Figure 1- 2

The default user name and password are both

admin

. If you want to view or configure

the CPE more, you should use the super account to log in to the web management page.
The default super user name is

superadmin

, and the password is

admin

To protect your CPE from unauthorized access, change the password after your first

Summary of Contents for MGL6201A

























































Search results

Summary of Contents for MGL6201A

Reviews:

Related manuals for MGL6201A

Brands by name

Popular brands

Smawave Technology MGL6201A, User Manual

Search results

Summary of Contents for MGL6201A

Reviews:

Related manuals for MGL6201A

Brands by name

Popular brands