SMASH TWIG 130 W, Instruction Manual

Page: 20 / 68

English - 21/68 20/68 - English
SMASH TWIG SMASH TWIG
When transporting or storing the scissors cover
always carry the scissor blades closed and the battery
disconnected.
Store battery power tools with the battery
disconnected and out of the reach of children.
2.3. SECURITY IN THE WORKING AREA
Keep the work area clean and work with good
lighting. Messy and dark areas cause accidents.
When working on streets, roads or areas close to
them, be careful not to endanger the movement
with the objects pushed by the air of your blower.
Do not operate this machine in explosive
atmospheres as well as in the presence of
flammable liquids, gases and dust. Electric
machines create sparks that can ignite dust or
fumes.
Keep children away and curious while driving this
machine. Distractions can cause you to lose control.
Ensure that children, people or animals do not enter
your work area.
2.4. ELECTRICAL SECURITY
Use only Smash batteries for this machine. Use only
the Smash charger to charge the Garland batteries.
Using a different battery or charger may cause the
battery to explode and the risk of fire.
Be sure to connect the charger to a 230 V and 50 Hz
DC power source.
The electrical plug of the charger of this machine
must match the base of the socket.
Never modify the plug in any way. Unmodified plugs
and matching bases will reduce the risk of electric
shock.
When using the battery charger, avoid body contact
with grounded surfaces such as pipes, radiators,
electric ranges and refrigerators. There is an increased
risk of electric shock if your body is grounded.
Do not expose this machine, charger or battery to
rain or wet conditions. The water that enters them will
increase the risk of electric shock.
Do not abuse the cable. Do not use the cable to carry,
lift or unplug the charger. Keep the cable away from
heat, oil, sharp edges or moving parts. Damaged or
tangled cables increase the risk of electric shock.
Never use this charger with the damaged cord or plug.
Before connecting the charger, check the plug and
cable for damage. If you discover any damage send
your machine to a technical service for repair. If the
cable is damaged or broken, unplug it immediately.
Damaged or tangled cables increase the risk of
electric shock.
The replacement of the plug or power cord should
always be done by the manufacturer or its technical
assistance service. It is recommended to connect this
charger to a residual differential device whose tripping
current is less than or equal to 30mA.
Never use a damaged connection base,
which does not comply with the regulations or the
requirements for this charger.
Disconnect the charger from the mains when it is not
in use to prevent damage in case of network overload.
Charge the battery only with the charger supplied
with the machine, in a dry place with a temperature
between 0º C and 40º C.