Smarty BX3000, User Manual

Page: 32 / 47

Setting Drive Recorder
If you want to use CH2 or
CH3 h
k thi b
Record Mode Normal Mode: Continuous recording will automatically
start after booting the BX3000.
Event Mode: Recording by G sensor Alarm1~3 or
CH3 check this box.
Event Mode: Recording by G-sensor, Alarm1~3 or
[PANIC] button.
Max Number of
Resolution D1(720x480), Half-D1(720x240)
Frame Rate 1 Camera supports 1~30 fps
2 Cameras supports 1~15 fps @ D1
Max Number of
Panic button
Record should
be 5~500.
2 Cameras supports 1~30 fps @ Half-D1
3 Cameras supports 1~10 fps @ D1
2 Cameras supports 1~15 fps @ Half-D1
Quality High (Large file size, but good picture quality)
Low (Small file size, but low picture quality)
Pre Event
P t E t
Pre-record/Post-record time can be set here.
P t d ti h ld b 5 300
32
Post Event Post-record time should be 5~300sec
Overwrite Overwrite (The image data is overwrites the oldest
files when the SD memory is full.)
One time (The recording stops automatically when
the SD memory is full.)