Smarty BX3000, User Manual

Page: 12 / 47

12'4#6+10
1. Make sure that the power cable is properly connected and turn on the car
power
power.
2. Blue LED & Red LED will turn on and slowly blinking simultaneously and
then Blue LED will remain on. Blue LED light means BX3000 is now ready
for the event recording and is started the Normal recording (Continuous
recording).
3. The normal recording (Continuous recording) will be automatically started,
if it set with your PC.
y
4. The event recording will automatically begin when triggered by Alarm1 to
3 or by the G-sensor and will begin with one short “Beep” sound.
5. The panic recording can be started by pressing the [PANIC] button.
Removing the SD memory card
Turn off the power and then check the BLUE LED light. Once the BLUE LED
light is off, take out the SD memory card.
Inserting the SD memory card
System Error Buzzer
Turn off the power and then check the BLUE LED light. Once the BLUE LED
light is off, insert the SD memory card.
System Error Buzzer
A “Beep” “Beep” sound will occur and the BLUE & RED LED light will blink
simultaneously when there is a system error or SD card is not inserted.
[Check the SD memory card when this occurs. To solve the problem, initialize
the SD card or replace the SD card]