Smarty BX3000, User Manual

Page: 11 / 47

SD Memory Card Format
Remove the power first. Press and hold the [PLAYBACK] & [PANIC] button.
(70%6+10/#+070+6
Then connect the power.
Press and hold the [PLAYBACK] & [PANIC] more than 2seconds after
booting. Then SD card initialization will start.
Once complete, all video & log files will be deleted and the configurations
will default to the factory settings.
Notice : PC Viewer software is pre-loaded on the SD card. Please ensure
you have installed the software to your PC before you format the card.
Built-in power backup (Super Capacitor)
When power to the unit is interrupted, BX3000 creates the last file using the
internal Super Capacitor.
BLUE LED (RECORD)
The blue LED shows the power is on.
The blue LED blink during event recording.
RED LED (Overwriting)
The red LED will be turned on when start overwriting.
Buzzer
“Beep” sound will occur when event/panic recording starts (this can be turned off
In the setting menu on the PC viewer, if required).
This also signals any system error
This also signals any system error.
VIDEO LOSS (warning)
“Beep” sound will occur continuously when video loss.
Check the camera and camera connection and turn off and on the unit to solve it.
And make sure the number of cameras that you connect before turn on the unit.
The number of cameras can be set in the settings menu on the PC viewer.