21
/
49
A summary of information can be found on the top including vehicle ID; Driver ID; Drive period;
Distance; and number of over‐accelerations, over‐decelerations, sharp turns, over‐speeding, over‐RPMs
that exceeded the pre‐set limit.
The top graph shows the speed (red) and RPM (grey) and right below are three indicator bars that show
driving patterns. The first bar shows driving (blue) and idling (grey). The second bar shows the speed
where white means within both the permitted speed and eco‐speed limit, green means above eco‐speed
but within permitted speed limit, and red means above the legal speed limit. The last bar shows the state of
the engine where white means the engine is off, blue means it is running properly within the pre‐set RPM
limit, and red means over acceleration, i.e. exceeding the pre‐set RPM limit.
The lower graph shows the G‐sensors where the x‐axis is in red, y‐axis in blue, and z‐axis is green. The
indicator bar right below shows jolts in the G‐sensor values, i.e. G‐sensor values that exceed the pre‐set
limit. Grey means normal conditions, red means jolts in the x‐axis direction, blue in the y‐axis direction,
and green in the z‐axis direction.
Configurations for this function can be set by clicking the [Settings] button in the right bottom corner. The
limits for g‐sensor, permitted speeding, excessive RPM, and eco‐speeding can be set under the tab Analyze,
and ranges for the two graphs can be set under the tab Component.
