19
/
49
Playback file list can be separated from the main screen and you can hide it or change the position.
In addition, file list can be displayed on the screen as well by clicking the "File List" button.
Video playback will end by clicking the "close" button.
Take out the SD Card after you click the "disconnect safely and removing the SD card" button.
Open
files
If you want to play only specific file among the data that has been backed up on the PC or SD Card, click
the “Open files” button.
Select the specific MDT file you want to play and click the "Open" button, then the image of the selected
file will be displayed.
You can play using the playback buttons.
Drive
data
BX2000 can record not only video and audio, GPS information, speed but also vehicle information like the
alarm, G‐Sensor and left / right blinker, brake, back, speed Pulse, RPM together.
The recorded information can be analyzed and played through PC Viewer software.
The default setting only displays the G‐sensor graphs but other information may be added by checking the
boxes in the upper part of the screen as below..
‐ G‐sensor (X axis: red, Y axis: green, Z axis: blue, based on the positioning of the main unit) is shown with
the data reference point zero‐point calibrated and positive shocks as (+) and negative shocks as (‐)
‐ Speed: GPS measured speed is displayed in grey while the speed‐pulse measured speed is displayed in red.
‐ RPM: Displayed in purple.
‐ All triggers (signals and alarms) are displayed on the bottom of the screen with the grey bar meaning the
trigger is activated.
