www.smartwitness.com
OPTIONAL
: remote switch installation (your CP2 may not include this accessory)
5.
Connecting a secondary camera to CP2 ch2 input
(Optional)
The CP2 is equipped with a simple plug & play connection to a variety of
SmartWitness 5V cameras. Simply connect the 2.5mm male stereo connector of
the SmartWitness camera (any model ending in “-S”, such as the SVA030-S) into
the female stereo input on the CP2 and mount the camera to the customer-
specified location in or around the vehicle. The most common installation of the
secondary camera is inside the main cabin and facing the driver. Use a securing
tape on the 2
nd
camera stereo connection, such as the silicone cold shrink.
A service loop is also recommended.
1 ft. lead from camera.
2.5mm stereo -
male
16’ extension cable (optional)
3 ft. input cable from CP2
2.5mm stereo -
female
