Chapter 2
Installation and Setup
2-3
SmarTV TouchPhone User Guide
If using a 48V DC power supply for networks
4.
without
POE, connect the AC cord to the supply
and the wall outlet. Connect the supply’s DC barrel plug to the power jack on the rear panel.
Caution:
Do not
use a 48V DC power supply if the network
also
provides POE to the LAN cable.
POE
LAN Jack
48V DC
Power
Input
Activity
LED
Link
LED
Reset
Switch
Verify that the
5.
Activity LED
on the NETWORK jack is flashing green to show the phone is
communicating with the network. If a high-speed (100MB/s) link is present, the
Link
LED turns
green. Wait for the phone to go through its boot process. This can take from 5 to 10 minutes to
complete.
Continue to the next section,
6.
Commission a Phone
.
Summary of Contents for TouchPhone
Page 6: ...vi SmarTV TouchPhone User Guide...
Page 18: ...Chapter 1 Features Specifications and Safety Information 1 12 SmarTV TouchPhone User Guide...
Page 42: ...Chapter 3 Placing Calls and Other Phone Tasks 3 14 SmarTV TouchPhone User Guide...
Page 58: ...Chapter 6 Charging USB Devices 6 2 SmarTV TouchPhone User Guide...