Chapter 6. Installation/Application of Bluetooth
6.1
Before using Bluetooth
“
Bluetooth
”
is one of Wireless Technologies. The aim of Bluetooth technology is tended to a low
cost, low power, and short-range radio product. The idea to develop Bluetooth is for replacing
physical cable connection in amount of mobile or portable devices.
Any two Bluetooth devices made as a Master-Slave structure creates a Bluetooth piconet network.
A single Bluetooth piconet has one Master and at most seven active Slaves. The Bluetooth
connection is only established between the Master and a Slave in a single piconet. Any two Slaves
in a single piconet cannot create a Bluetooth connection.
6.2 Bluetooth
Dongle
installation
To use a Bluetooth wireless radio, it is required to install a Bluetooth dongle on each SmartTablet
that consists of a network and to set up a dongle driver.
Your purchased SmartTablet provides 2 USB ports. Insert a provided Bluetooth dongle into any
one port. (A Bluetooth dongle is an option when SmartTablet is purchased.)
When SmartTablet is purchased, a Bluetooth driver is already installed. But when you install the
Window again, or you do not buy HDD, install the driver by yourself.
(Caution) It is advisable to use a Bluetooth in an open area. Networking may not work best under
the condition of many walls or obstacles.
Installation of dongle driver
1) Insert a provided Bluetooth dongle installation CD into a CD drive or check if your hard disk
drive has drivers (D:/ SmartTablet drivers > Bluetooth) if yes click on setup.exe icon. A screen
shows up as follows. Select required language and select
OK.
Page
25
10/2/2007
