Vehicle docking station
Mounting SmartTablet on vehicle follow the steps given below.
•
Mount SmartTablet on mounting unit so that the bottom notch fits in the Pin holder of the
mounting unit and press it against on the resting panel till you hear the locking sound.
•
As per the requirement, connect Power cord to DC input jack
•
Instead of AC/DC adapter SmartTablet can operate on batteries, so please check if the
battery is connected at the rear side of the SmartTablet.
•
Switch on the power button.
•
Connect PS/2 keyboard as well as USB mouse if required.
•
When you push down the top of locking mechanism, the other side of locking mechanism
will lift up like seesaw and you can take off SmartTablet.
Docking Station (Vehicle)
Bottom locking mechanism
Top locking mechanism
Without any docking station
•
In order to use it without any mounting connect power cord to Dc input of SmartTablet
•
Switch on the power button.
•
Connect PS/2 keyboard as well as USB mouse if required.
Page
13
10/2/2007
