SmartStore SS1507, Assembly Instructions Manual

Page: 12 / 15

11
ROOF ASSEMBLY
fig.2
fig.3
X 4
X 4
Barge
IMPORTANT—FOR SHEDS WITH OPTIONAL CLEAR
ROOF PANEL
Assemble as below, making sure that the Clear Roof Sheets
overlap the standard roof sheets on both sides.
The Clear Roof Panel must be secured to the front and back
Top Plates. Pre drill and fasten with the 40mm weatherseal
nails provided.
.
fig.1
SIDE
WALL
FRONT WALL
BACK WALL
SIDE
WALL
BOTTOM PLATE
TOP PLATE
SELECT:
3 x 0.885 Roof Sheets
1 x 1.550 Spouting
2 x 0.885 Barges
20 x 40mm Weatherseal Nails
20 x Rivets
STEP 1:

Ensure Shed is sitting level and square.

Lay Roof Sheets on the Top Plates (with slots at front).

Rivet sheets together at overlaps with 1 x rivet per join .
STEP 2:

Position the Roof Sheets with front overhang of
130mm at each front end (
fig. 1 ).

Using 4 x 40mm weatherseals, nail the Roof Sheets to
the Top Plates at each corner, ensuring ribs on the
Roof Sheets line up with ribs on the Wall Sheets
(
fig.3 ).
STEP 3:

Ensure the Front and Back Top Plates are straight. Nail
the roof sheets to the front & back Top Plates, using 1 x
nail per pan (
fig.2 ).
STEP 4:

Place barge flashings on roof at end of shed ensuring
the diagonal trimmed end is at the front.

Rivet the Barge Flashings to the roof and the side wall,
using four rivets on top of barge and four into the side
(
fig.3 ).
STEP 5:

Place spouting in position and rivet to Barge Flashings at
each end and rivet to roof sheets (1 Rivet per 1 Sheet).