2
Magnetek HPV900AF Drive
EQUIPMENT/SETTINGS VERIFICATION
Verify that the Job Specification parameter table on the drawings
“Sheet 1: Getting Started” matches the actual equipment.
Below is a sample table showing the important values that will
affect operation.
MAGNETEK PARAMETER LOCATION REFERENCE
ADJUST A0
DRIVE A1
Encoder Pulses (Follow procedure in Axial Flux manual Pg. 9)
POWER CONVERT –
A4
Input L-L Volts
MOTOR –
A5
Rated Mtr Power (Kw)
Rated Mtr Volts (VAC)
Rated Exit Freq (60Hz)
Rated Motor Curr (FLA – Amps)
Motor Poles
Rated Mtr Speed (RPM)
CONFIGURE C0
USER SWITCHES –
C1
Encoder Select
“Axial Flux”
Sample: Sheet 1: - Getting Started
Motor
Volts
Motor
Amps
Motor
RPM
Motor
Poles
Motor
HP
Brake Volts
Pick/Hold
Encoder
PPR
Main Line
Volts
Motor
Frequency
