- 18 -
Start Delay Time
：
This column allows users to have each power device connected
start up at different moments instead of all starting up at the same time. Each power
outlet can be programmed to wait for the specified time period in seconds or minutes
before startup.
Shutdown Delay Time
：
Just like the above the start delay time, this column allows
users to have each power device connected shut down at different moments instead
of all shutting down at the same time.
3-1-3
Power Operation Scheduling
You may program this remote power switch with timer schedule for action of
switching the power equipment ON or OFF or reboot in this section.
Recurrence
：
You can set the recurrence frequency of the power action for each outlet.
The recurrence can be yearly, monthly, weekly or daily.
Time
：
Set up the action time for each power outlet. The time entry is on the bottom of
the schedule table
Action
：
Select which power action to take place, ON, OFF or Reboot.
Delete
：
If you want to delete this schedule, double-click on the
“
X
”
to confirm the
removal of the unwanted schedule entry.
3-1-4
Network Detection PING
When the connected power equipment is a network IP-addressable equipment, you
can set up this power switch to ping IP network devices so to confirm the continued
operation of the equipment.
