6
www.smartpool.com
SYMPTOM
POSSIBLE REASONS
SOLUTIONS
UNIT GOING BACK AND FORTH ONLY A FEW FEET
AT A TIME
Drive motor has water in it
Replace Drive motor
Debris stuck in drive wheel
Remove debris
UNIT NOT FUNCTIONING
Outlet not putting out proper voltage
Check outlet voltage
Transformer not operating
Check transformer output
Cord Defective
Check Cord Voltage; Replace cord if needed
Outlet not putting out proper voltage
Check outlet voltage
TRANSFORMER LIGHT OFF
Transformer may be operating but the light is not on.
Test the unit with the transformer
Transformer not operating
Check outlet voltage
UNIT MOVES BUT IT IS NOT PICKING UP DEBRIS
Pump motor malfunction, broken or jammed impeller
Change pump motor, or replace or free impeller
UNIT IS CLIMBING OUT OF POOL
The pool does not have 2 feet of vertical slope for I
ncline sensor
Replace Filter Bag with new 8 hole bag
Incline sensor is defective
Remove Pump motor and shake. If the unit continues to climb in spite of freed incline sensor,
Replace pump motor
UNIT MISSES AREAS OF POOL
Size of Pool is too big for unit
Make sure the pool is less than 40 feet. If it is, reposition the power supply and rerun the unit.
Cord is tangled
Straighten cord before and after each use.
UNIT HOVERING ON BOTTOM OF POOL
Filter bag clogged
Pump motor malfunction
Clean Filter Bag
Check Pump Motor
TROUBLE-SHOOTING GUIDE
Please visit www.smartpool.com for repair instructions.
