8
4.0 Test the unit
4.1 Fill a 5 Gal pail 1/3 full with water and drop the pail from a height of 6î
from the surface of water. The wave created should activate the alarm
after allowing ~4 ft per second to reach the alarm. Adjust the sensitivity
if necessary (see page 6).
4.2 Between each test, turn OFF the unit and wait a few minutes until the
water settles down, and then turn on the unit again.
4.3 The unit will chirp once every 60 seconds when the battery is running
low.
5.0 Sensor Calibration
While the life expectancy of this alarm system is in excess of five years,
the effects of a swimming pool environment may shorten this period.
It is recommended that the alarm be recalibrated or refurbished by
the manufacturer every 5 years after installation. For questions about
installation and warranty, call 1-888-560-7665
Meijer.com
Summary of Contents for PE-12
Page 4: ...4 Meijer com ...
