6
2.0 Sensitivity Adjust
2.1 Loosen the two screws on the
bottom of the sensor.
2.2 Move the plastic piece with the
pointer pointed to H if you want
higher sensitivity or to L if you want
lower sensitivity. The unit is preset at
factory to H.
2.3 If you have to place the unit near
the return, snap the cap onto the
sensor cage facing the direction of
water flow.
NOTE: The deflector will reduce sensitivity. Test
the alarm unit as described in section 4.0
before use
2.1
2.2
2.3
Meijer.com
Summary of Contents for PE-12
Page 4: ...4 Meijer com ...
