5
1.0 Installation
1.1 Take top seat cap of pool off and
remove the screws holding one end of
the top seat
1.2 Lift up one end of the top seat of pool
1.3 Hang the sensor tube onto the guide
rail. Back of the sensor unit should rest
against the inside of pool wall.
1.4 For wider guide rail, move the stainless
bracket forward by removing the three stain-
less steel screws and moving the bracket.
1.5 Tighten the set screws on the stainless steel
mounting bracket against the pool wall after
inserting the plastic spacer to protect wall and
liners.
1.6 Mount the
control unit
onto the
outside upright
of the pool
using screws or
tape provided.
1.7 Replace the
top seat and top cap.
For guide rail
up to 1.2 wide
For guide rail
up to 3/4 wide
1.4
1.7
Move
forwar
d
1.2
1.3
1.5
1.1
1.4
1.6
Meijer.com
Summary of Contents for PE-12
Page 4: ...4 Meijer com ...
