SmartOne 70-600000-001 Installation Instructions Download Page 1

TM

Effective: October 2016

Remote Releasing Module

DescRiption

The  Remote  Releasing  Module  (RRM)  is  a  UL  Listed,  FM  Approved          

smartone

® 

Field Device. The RRM provides the ability to remotely activate 

extinguishing-system control devices. Connection is via the 

smartone

  

com-

patible control panel’s Signaling Line Circuit (SLC). The module is field-pro-

grammable using the control panel keypad or Hand-Held Programmer. 
The RRM provides internal supervision of communication with the control 

unit, connections to external power supply, and memory status.
Solenoid release circuits are power-limited and supervised for short circuit 

by using an In-line Releasing-Circuit Device (P/N 06-220023-001). In the 

event of a ground fault, open, short or a relay contact failure, the device 

will transmit a trouble status to the control unit.
A status LED is mounted on the RRM and indicates the module’s status: 

Normal is indicated by a flash every 9 seconds; Output Activity is indicated 

by the LED on continuously (no flashing); Trouble is indicated by the LED 

being OFF.
The RRM is intended for indoor dry location use, and is available in two 

models, one for mounting in a standard electrical box and a second model 

for mounting in suitable UL-864 Listed cabinets.

p/n 70-600000-001: standard Mounting

North American 4-11/16 in. electrical box with a double gang plaster

ring (Rayco Model 841 or equivalent), 1/2 in. raised

4 in. square, 2-1/8 in. deep electrical box

p/n 70-600000-002: in-cabinet Mounting

Any suitable UL-864 Listed enclosure with no other electronics.

The module terminal block will accept #12, #14, #16 and #18 AWG wire  

(4.0 mm

2

, 2.5 mm

2

, 1.5 mm

 and

  

1.0 mm

 respectively). Size #18 being a 

minimum requirement. The use of solid wire is recommended.

TM

KIDDE-FENWAL INC.
400 MAIN STREET, ASHLAND, MA 01721
TEL: (508) 881-2000 FAX: (508) 881-8920

This literature is provided for informational purposes only. 

KIDDE-FENWAL,INC. assumes no responsibility for the 

product’s suitability for a particular application. The product 

must be properly applied to work correctly.

If you need more information on this product, or if you have 

a particular problem or question, contact KIDDE-FENWAL 

INC., Ashland, MA 01721. Telephone: (508) 881-2000

06-236636-001        Rev.  AD   

     ©

2016 Kidde-Fenwal, Inc. 

installation instRuctions

This device complies with Part 15 of the FCC rules. Operation is subject to the following two 

conditions: (1) This device may not cause any harmful interference, and (2) This device must 

accept any interference received, including interference that may cause undesired operation.

control unit

part number

installation,

operation and

Maintenance Manual

part number

configuration

software

user's Guide

part number

FenwalNET 6000:

74-600000-001

06-236529-001

06-236529-002

74-600000-510

06-236529-001

06-236529-002

ARIES:

76-600000-004

06-236530-001

06-236530-002

FenwalNET 8000-ML:

74-800100-001

06-237041-001

06-237042-001

74-800101-002

06-237041-001

06-237042-001

74-800200-001

06-237041-001

06-237042-001

74-800201-002

06-237041-001

06-237042-001

ARIES NET

Link

:

76-800100-001

06-237058-001

06-237059-001

76-800101-002

06-237058-001

06-237059-001

76-800200-001

06-237058-001

06-237059-001

76-800201-002

06-237058-001

06-237059-001

74-800102-001

06-237041-001

06-237042-001

74-800202-001

06-237041-001

06-237042-001

76-800102-001

06-237058-001

06-237059-001

76-800202-001

06-237058-001

06-237059-001

Reviews: