8
Detailed Fault Codes
The following are the fault codes that may be displayed. The remedy section
of each fault is the suggested sequence of repair or replacement. If the first
suggestion does not remedy the fault, check the next on the list.
Fault Code 1
Communications Error.
Communications failure between the sensor module and motor control
module.
Remedy:
(1) Check the continuity of the module interconnecting harness.
(2) Replace the sensor module.
(3) Replace the motor control module.
Fault Code 2
Drum Gap Cannot be Located.
Remedy:
(1) Ensure the sensor module is correctly located and clipped
into place.
(2) Replace the lens on the sensor module.
(3) Replace the sensor module.
(4) Remove the top deck and clean the drum sensing “bumps”
on the outside of the drum end.
(5) Replace the drum.