11
Fault Code 10
24 Volt Supply Measurement Error.
The sensor module measures low voltage on actuator power supply.
Remedy:
Replace the sensor module.
Fault Code 11
Lid Lock Open Circuit.
Remedy:
Check the lid lock harness and coil. If there is continuity through
these, replace the sensor module.
Fault Code 12
Lid Lock Switching Device Failure.
Remedy:
Check that there are no short circuits in the lid lock circuit which
may have caused the failure in the sensor module. The
resistance of the lid lock should be between 50 and 100 ohms. If
the circuit is correct, replace the sensor module.
Fault Code 14
Sensor Module Fault.
Remedy:
Replace the sensor module.