____________________________________________________________________________________________
DIGITAL VIDEO RECORDER
7
Press this button to control a PAN/TILT/ZOOM camera via RS-232
connection.
8)
ZOOM button
Press this button to display zoom area box; press again to enlarge the image.
Pressing cursors can move this zoom area.
9)
MENU button
Press this button to display the MAIN MENU screen.
It is also used as EXIT button to exit all kinds of OSD screen.
10)
CLEAR button.
In Zoom mode, pressing this button reduces the image.
In stop mode and playback mode, pressing this button disappears time &
date OSD.
Pressing it again appears the OSD.
On ‘RECORD GROUP SET’ menu, it sets each channel ‘Motion Detection’.
11)
Direction (
bcef
) buttons.
In Menu setup mode, used to move the cursor.
In Zoom mode, used to move the zoom area.
12)
TIME SEARCH button
Press this button to display the Time Search menu.
13)
ALARM SEARCH button
Press this button to display the Alarm Search menu.
14)
Numeric buttons (NO. 1~9)
Used to enter the password and select the camera numbers.
15)
Quad/Sequence, 0 button
Press this button to display the cameras in quad mode or to switch sequence
function.
In addition, this button can be used as number 0 to set the password.
16)
AUDIO PB button
Press this button to synchronize the sound track with the scenes.
17)
Remote control signal receiver.
18)
Mode Indicator.
19)
SHUTTLE HOLD button
This button retains the selected playback or reverse playback speed.
Rotate the SHUTTLE ring to the desired search speed, and then press the
SHUTTLE HOLD button while holding the SHUTTLE ring at the selected
search speed. Search speed will be maintained even when the SHUTTLE
ring is returned to its original position.
