____________________________________________________________________________________________
DIGITAL VIDEO RECORDER
39
B. Backing up data (AUTO or MANUAL mode)
1) When the
BACKUP
mode on the
SYSTEM SET
menu is set as
AUTO;
Press the BACKUP button on the front panel or remote controller,
then, an arrow (
X
),
direction to the right
, appears and the unit starts
backing up to the external device from the beginning of the HDD
2) To stop backing up, press the BACKUP button again. Then, the arrow
(
X
) starts flashing while the archiving process is halted. The arrow (
X
)
goes off at the end of the process, and the next backup recording will
begin at this point.
3) When the
BACKUP
mode on the
SYSTEM SET
menu is set as
MANUAL;
Press the BACKUP button, then the BACKUP TIME SET
mode appears as picture below.
4) Now, set the starting and ending times. Within the time range, there
should be recorded data exist in the main hard disk drive.
5) Press the BACKUP button after the setting. Then, the arrow (
X
)
appears and backup recording within the time range is started.
C. Backup Search (Time-Search, Alarm-Search, Playback)
a) When an external SCSI DISK type is connected
1)
Press the MENU button and go to the SYSTEM SET menu.
2)
Choose as EXTERANAL on the PLAYBACK HDD menu.
3)
Press the MENU button to exit the menu.
4)
After that, the external SCSI DISK can be controlled like the internal
HDD.
(Time Search, Alarm Search, Playback)
