SmarTherm 10L 2kw OSHW, Instructions For Use Manual

Page: 8 / 12

ANNEX I
Water heaters in accordance with EU regulation 812/2013
Trade mark Smartherm Smartherm Smartherm Smartherm
Model 10L 2kw USHW 15L 2kw USHW 10L 2kw OSHW 15L 2kw OSHW
The declared load profile XXS XXS XXS XXS
Water heating energy efficiency class C C C C
Water heating energy efficiency η
wh
% 29 28 31 30
The annual electricity consumption AEC kWh/annum 623 655 598 625
Thermostat temperature settings T
out of box
°C 60 70 60 60
Water heaters in accordance with EU regulation 814/2013
Model 10L 2kw USHW 15L 2kw USHW 10L 2kw OSHW 15L 2kw OSHW
Daily electricity consumption Q
elec
(kWh) 3,102 3,249 2,91 3,071
Declared load profile XXS XXS XXS XXS
Mixed water at 40 °C V40 L 13 25 16 24
T
max
°C 70 70 70 70
Out of box mode T
out of box
°C 60 70 60 60
Water heating energy efficiency η
wh
% 29,3 28,1 30,8 29,5
DESCRIPTION TO ANNEX I
(1) supplier‘s name or trade mark (2) supplier‘s model identifier (3) the declared load profile, expressed by the
appropriate letter and typical usage in accordance with Table 3 of Annex VII (4) the water heating energy efficiency class of the
model, determined in accordance with point 1 of Annex II (5) the water heating energy efficiency in %, rounded to the nearest integer (6)
the annual electricity consumption in kWh in terms of final energy and/or the annual fuel consumption in GJ in terms of GCV, rounded to
the nearest integer and calculated in accordance with point 4 of Annex VIII (7) the thermostat temperature settings of the water heater,
as placed on the market (8) the daily electricity consumption Q elec in kWh, rounded to three decimal places (9) the declared load profile,
expressed by the appropriate letter in accordance with Table 1 of this Annex (10) the mixed water at 40 °C V40 in litres, rounded to the
nearest integer;(11) maximum temperature of the thermostat (12) ‘out of the box-mode’ is the standard operating condition, setting or
mode set by the manufacturer at factory level, to be active immediately after the appliance installation, suitable for normal use by the
end-user according to the water tapping pattern for which the product has been designed and placed on the market (13) the water
heating energy efficiency in %, rounded to one decimal place (14) All specific precautions for assembly, installation and maintenance are
described in the operating and installation instructions. Read and follow the operating and installation instructions. (15) All of the data
that is included in the product information was determined by applying the specifications of the relevant European directives.
Differences to product information listed elsewhere may result in different test conditions. Only the data that is contained in this product
information is applicable and valid.