>>
Operating & installation instructions bravour
Subject to technical changes.
V 2.1.5
www.SmartHeat.de
>>
17
8.3 Connection of the domestic hot water (DHW) tank
The compact heat pump bravour has three connections to the DHW tank: the cold water, the hot water and the circu-
lation connection. Optionally flexible tubes for these connections are available. They have each a length of 165cm.
On site a DHW safety device has to be installed (this is not in the delivery content). If necessary a circulation connec-
tion can be connected to the circulation system. If this is not required, the connection at the tank hast to be closed.
Domestic hot water tank
- Material:
Stainless steel 1.4571,
pickled and passivated
- Operating pressure:
10 bar
- Operating temperature:
90°C
Heating buffer tank
- Material:
S 235 JR
- Operating pressure:
3 bar
- Operating temperature:
110°C
Content domestic water:
193 litre
Content heating water:
56 litre
Weight:
78 kg
Insulation:
PU rigid foam (CFC-free)
KW:
Cold water
1 inch external thread
WW:
Domestic hot water
1 inch external thread
Z:
Circulation
1 inch external thread
KV:
Boiler flow
3/4 inch internal thread
KR:
Boiler return
3/4 inch internal thread
M:
Connection
3/4 inch internal thread
N:
Connection
3/4 inch internal thread
T:
Temperature sensor
For installation of DHW safety device within the heat
pump a drain with siphon has to be used.
Close the circulation connection, if you do not use it.
If you set the DHW temperature with 60° or higher, on
site a safety protection against scalding has to be installed
(e.g. ESBE Serie 30MR).
CUT -X-X-
connection M-12
adjustable feet
deareator
1/8 inch int. thread
T
Summary of Contents for bravour 008 BWi
Page 33: ......
