HRC200 Industrial Remote Control User Manual Page 16 of 16
Fig.11 HRC200M Guide Rail Installation
Fig.12 HRC200M Screw Installation
8
TROUBLESHOOTING
Table 12 Troubleshooting
Symptom
Possible Solutions
Receiver Inactive for Power
Check the power supply.
RS485 Comm. Abnormal
Check the connection line;
Check whether communication address, baud rate, parity bit, stop bit
set is correct;
Check whether A(+) and B(-) of RS485 are reversely connected;
Try to connect 120Ω terminal matching resistor.
Pairing Failure
Check whether the channel of remote control and receiver is same.
Receiver and PC Fails to
Connect
Check whether the receiver dial switch is set to 0000 position.
Remote Control Key Inactive
Check whether the emergency stop key is pressed, when it is
pressed, other function keys are inactive.
_________________________________
