HRC200 Industrial Remote Control User Manual Page 12 of 16
5
PROGRAMMABLE PARAMETERS
5.1
PC PARAMETER SETTING
Before operation, please remember the dial switch position of HRC200M, then set switch to
configuration mode (namely 0000 position). PC connects to receiver via RS485 communication
conversion module, then the related parameter configuration of receiver can be done via PC software.
After the configuration is completed, dial switch must recover to previous position.
Fig.6 PC Configuration Interface
5.2
PARAMETER RANGE AND DEFINITION
Table 10 Parameter Content and Range
No.
Item
Range
Default
Description
1
Comm. Address
1-254
1
2
Baud Rate
(0-3)
2
0: 2400bps
1: 4800bps
2: 9600bps
3: 19200bps
3
Parity Bit
(0-2)
0
0: No Parity
1: Odd Parity
