HGM9580 BUS TIE BUS PARALLEL UNIT
HGM9580 Bus Tie Bus Parallel Unit ISSUE 2014-02-16 Version 1.0 Page 9 of 33
4.2 PUSHBUTTONS
Alarm Reset
If alarm occurs, pressing the button can reset this alarm.
Manual Mode
Press this key and controller enters in
Manual
mode.
Auto Mode
Press this key and controller enters in
Auto
mode.
Mute
Alarming sound off.
Lamp test
Press this key can test the lamp is normal or not (lamp
test).
Close
Can control bus to switch on in
Manual
mode.
Open
Can control bus to switch off in
Manual
mode.
Up/Increase
1) Screen scroll;
2) Up cursor and increase value in setting menu.
Down/Decrease
1) Screen scroll;
2) Down cursor and decrease value in setting menu.
Left
1) Screen scroll;
2) Left move cursor in setting menu.
Right
1) Screen scroll;
2) Right move cursor in setting menu.
Set/Confirm
1) Pressing and holding for more than 3 seconds enters
parameter setting menu;
2) In settings menu confirms the set value.
Exit
1) Return to main menu;
2) Return to previous menu in setting menu.
WARNING:
Default password is 00318, user can change it in case of others change the
advanced parameters setting. Please clearly remember the password after changing. If you forget
it, please contact Smartgen services and send all PD information in the controller page of
“
ABOUT
” to us.
