HGM8110DC-2 GENSET CONTROLLER USER MANUAL
HGM8110DC-2 Genset Controller 2020-02-20 Version 1.0 Page 12 of 69
5
OPERATION
5.1
KEY FUNCTION
Table 5 - Key Description
Icon
Key
Description
Stop/Reset
Stop running generator in Auto/Manual mode;
Reset alarms in stop mode;
Press for over 3s to test whether panel indicators are normal
(lamp test);
During stopping process, press this button again to stop
generator immediately.
Start
Start genset in Manual mode.
Manual Mode
Press this key and put controller in
Manual
mode.
Auto Mode
Press this key and put controller in
Auto
mode.
Alarm Mute
Remove alarm sound;
If there is trip alarm, pressing the button at least 3 seconds can
reset this alarm.
Close
Control breaker to close in manual mode;
Open
Control breaker to open in manual mode;
Set
Enter setting interface;
Up/Increase
1) Screen scroll;
2) Move up cursor and increase value in setting menu.
Down/Decrease
1) Screen scroll;
2) Move down cursor and decrease value in setting menu.
Left
1. Page scroll;
2. Left move cursor in setting menu.
Right
1. Page scroll;
2. Right move cursor in setting menu.
