HGM6100N-RM REMOTE MONITORING MODULE USER MANUAL
HGM6100N-RM Remote Monitoring Module 2019-08-06 Version 1.0 Page 7 of 14
4 OPERATION
4.1 KEY DSCRIPTIONS
Table 3 Key Descriptions
Icon
Keys
Description
Stop/ Reset
Under manual/auto mode, it can stop the running genset.
In the state of genset alarm, it can reset the shutdown alarms.
Under stop mode, press for over 3s, it can test whether panel indicators
are normal (lamp test);
In the process of stop, press it again and genset can be stopped quickly.
Start
Under manual mode, press it and the static genset shall start;
In the process of start, press it and genset status shall jump to next one.
Manual
Press it and controller shall be put in the manual mode.
Auto
Press it and controller shall be put in the auto mode.
Close/Open
Under manual mode, press it and breaker close/open can be controlled.
NOTE:
It is only applicable for HGM6120N-RM Series.
Close
Under manual mode, press it and breaker close can be controlled.
NOTE:
It is only applicable for HGM6110N-RM Series.
Open
Under manual mode, press it and breaker open can be controlled.
NOTE:
It is only applicable for HGM6110-RM Series.
Set/
Confirm
Press it and enter menu list interface; move cursor in parameter settings and
confirm setting information.
Up/
Increase
Scroll screen up;
Move up cursor and increase value in setting menu.
Down/
Decrease
Scroll screen down;
Move down cursor and decrease value in setting menu.
Home/Return
In main interface press it to return to the home page;
In parameter setting menu press it to exit from parameter settings.
NOTE:
if remote mode is active, all keys on the panel are functional; if not, only
keys
are
functional on the panel.
