HAT160 ATS CONTROLLER USER MANUAL
HAT160 ATS Controller 2020-03-14 Version 1.1 Page 6 of 21
3. SPECIFICATION
Table 3 Technical Parameters
Items
Contents
Operating Voltage
AC power A1N1/A2N2 supply.
Rated AC240V (range: AC170V~277V)
Power Consumption
Under rated voltage, power consumption of voltage circuit is not more than
3VA.
AC Voltage Input:
3-phase 4-wire
Single phase 2-wire
AC170V
– AC277V (ph-N)
AC170V
– AC277V (ph-N)
AC Frequency
50/60Hz
Start Relay
7A AC250V
Volts free output (Normally close)
1# Close Relay
7A AC250V
Volts free output (Normally open)
2# Close Relay
7A AC250V
Volts free output (Normally open)
LO/NO Relay Output
7A AC250V
Communication
LINK interface, MODBUS-RTU Protocol
Case Dimensions
86.9mmx158mmx119.5mm
Panel Cutout
73.5mmx144mm
Working Conditions
Temperature: (-25~+70)°C; Humidity: (20~93)%RH
Storage Condition
Temperature: (-25~+70)°C
Protection Level
IP55: when waterproof gasket installed between controller and control
window;
Insulation Strength
Apply AC1.5kV voltage between high voltage terminal and low voltage
terminal and the leakage current is not more than 3mA within 1min.
Weight
0.6kg
