©
2017 SMARTfit, Inc. • www.smartfitinc
.com
25
Chapter 5
Combination of SMARTfit Single/Mini and Wired or
Wireless Pods
•
The CPU runs both the SMARTfit Single and Mini systems in combination with SMARTfit
Pods or it can run all 3 systems separately.
•
SMARTfit Pods can be placed on the floor, mounted to walls, or stuck to pod stands
using the Velcro supplied.
•
Pods can play as wired or wireless targets.
•
If you have wireless pods they need to be charged overnight (6-8 hours) for a full
day’s
use.
Charging Your Wireless Pods
A special power charging cable is supplied which connects to the back of the wireless pods. Up
to six pods can charge at a time and a single charge should provide up to 18 hours of play.
1.
Charge all pods prior to setting the system up for the first time.
2.
Plug power cord into a 110VAC-electrical outlet.
3.
Plug the other ends of charging cord into the back of each Pod.
4.
The pod may take 6-8 hours to fully charge.
5.
Unplug your charging cord from the wall outlet before starting up the CPU.
System Start Up with Pods
There is a special process when including pods into your system. Follow the steps below when
your switching from the Single/Mini configuration to the No Panel (Pod) configuration or if
your adding/subtracting the number of pods in play.
1.
Make sure your Pods have sufficient charge
2.
Turn your Pods off
3.
Turn your CPU on
4.
Change your system configuration to No Panel