Trueshopping
Maintenance
4.1 Summary
If the equipment can’t work normally, you should stop working at once and check for
faults. You must use a trained professional for maintenance; those without appropriate
training must not check, clear or repair equipment. When repairing use appropriate spare
parts.
Before any maintenance, make sure the main switch has been cut or remove the fuse.
4.2 Cleanness
Take the shell and sideboard trim, and use clean and dry low-pressure air to blow dust and dirt from air alleyway
and inner parts. Clear the dirt, dregs and grime from the head of welding tongs trim.
In order to allow enough circulating and supply proper cooling, it’s necessary to keep the alleyway clean.
After cleaning by low-pressure, check if any hardware has become flexible, if flexible, you must firm them.
Check if insulation of cable has been frayed, if the cable has been frayed, you must replace it.
If you replace the cable improperly, the bare cable may contact the grounding objects. The
arc can hurt your eyes or cause fire. If the body comes into contact with the cable linker or
lead; you may be burned/injured.
4.3 Check and Maintenance
Keep the power dry, remove grease and make sure the power can’t be damaged by flaming metal and spark.
4.3.1 Transformer
Transformer needn’t any maintenance except to clear the dust and dirt trim. Use low-pressure air to let it clean
and dry.
4.3.2 Replacing the wire reel
When the wire on the feed reel is used up, you will need to replace as in section 2.3.2.
4.3.3 Cable
Place cable in a clean and dry place.
www.trueshopping.co.uk
10
