Longo programmable controller LPC-2.NE1 module
3.2 Mounting instructions
Figure 3: Housing dimensions
•
Dimensions in millimeters.
All connections, module attachments and assembling must be
done while module is not connected to the main power supply.
Mounting instructions:
1. Switch OFF main power supply.
2. Mount LPC-2.NE1 module to the provided place inside an electrical panel (DIN
EN50022-35 rail mounting) to the left side of the LPC-2 controller module.
3. Mount other LPC-2 modules
(if required). Mount each module to the DIN rail first,
then attach modules together through K1 and K2 connectors.
4. Connect devices and sensor wires according to the connection scheme in Figure 2.
5. Switch ON main power supply.
6. LED1 and LED2 should light on according to the Table 3.
Dismount in reverse order. For mounting/dismounting modules to/from DIN rail a free
space of at least one module must be left on the DIN rail.
NOTE: LPC-2.MC7 main control module should be powered separately from other electrical
appliance connected to LPC-2 system. Signal wires must be installed separately from
power and high voltage wires in accordance with general industry electrical installation
standard.
5
1 8
90
9
5
36
6 0
